Anchoring Equipment

Lewmar Deck Foot Switches are single direction switches and come ready to install. With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control...

Deck Foot Switch - Windlass up - White

22 lb Galvanized Danforth/Fluke Anchor

Deck Foot Switch, windlass up - Grey

Lewmar Deck Foot Switches are single direction switches and come ready to install. With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control...

Our guarded rocker switch controls the up and down function of all our anchor windlass models. The switch can be mounted at the helm as the main switch for operation, or mounted at a second station as a secondary switch. It features a raised plastic...

The new DTX anchor fills the gap between the existing galvanised and stainless Delta anchors, allowing boat owners and builders to specify a stainless steel anchor for a significantly reduced outlay.Made from 316 stainless steel, the DTX anchors feature...

LEW-68000889

16.5 lb Galvanized Danforth/Fluke Anchor  

The CPX0 fills the gap at the small end of the CPX range for boats from 20ft up to around 36ft, dependant upon motor specification.  Powered by a 700W 12V motor, the unit utilises the tried and tested worm-wheel gearbox architecture from its larger...

 Lewmars 3-strand rope is an economical choice for your windlass rode. Keep in mind, the windlass does not stow the rode in the anchor locker - gravity does. So make sure you have ample depth and volume in your anchor locker to accommodate the...

Lewmar's CRW400 windlass represents a step-change in engineering and design for small boat windlasses.Built around a stainless steel chassis with composite bearing technology and a robust UV-stabilised ABS shell the CRW400 is highly corrosion resistant...